{"id":30,"date":"2007-05-27T18:37:01","date_gmt":"2007-05-27T22:37:01","guid":{"rendered":"http:\/\/www.washingtonwinemaker.com\/blog\/2007\/05\/27\/a-simple-mead-recipe-fining-with-bentonite\/"},"modified":"2007-05-27T18:37:01","modified_gmt":"2007-05-27T22:37:01","slug":"a-simple-mead-recipe-fining-with-bentonite","status":"publish","type":"post","link":"https:\/\/washingtonwinemaker.com\/blog\/2007\/05\/27\/a-simple-mead-recipe-fining-with-bentonite\/","title":{"rendered":"A Simple Mead Recipe: Fining with bentonite"},"content":{"rendered":"<p>When I rack the mead from it&#8217;s primary fermenter to a 5-gallon carboy, it will throw off a deposit of mostly dormant yeast. To separate the mead from this sediment, or lees as it&#8217;s called, I&#8217;ll have to rack again in a month or so. Since I&#8217;m going to have to rack again anyway, I&#8217;ve decided to fine the mead at this step. Fining clarifies the mead by adding something that combines with suspended or dissolved solids then quickly falls to the bottom of the container. The &#8220;something&#8221; I&#8217;m going to add is called bentonite, a type of clay that&#8217;s very good at removing protein from mead. I&#8217;ve waited as long as three years for some mead to clear on its own, and still not been satisfied. Bentonite has worked for me every time.<\/p>\n<p><img decoding=\"async\" src=\"\/pic\/20070527 - measuring bentonite.jpg\" alt=\"Ready to measure bentonite with 150 ml water in a measuring cup, bentonite powder in a jar, and measuring spoons.\" title=\"Measuring bentonite\" vspace=\"10\" \/><\/p>\n<p>Bentonite is usually sold in powdered form, and you need to sort-of-dissolve (hydrate) it in water first. It doesn&#8217;t dissolve, but if you mix it into hot water and let it sit overnight, it will form a usable slurry. The way to do this is to measure the right amount, in grams, and use 10-20X that amount of water, in milliliters, to hydrate it. What&#8217;s the right amount? I&#8217;ve found that advice varies a lot. I use 0.5 g\/L. Since I&#8217;m racking to a 5-gallon carboy and 1 gallon is about 3.785 liters, I need enough for about 19 liters &#8211; just under 10 grams. My problem is that I haven&#8217;t got a scale that&#8217;s accurate for such small quantities, so I use rules of thumb that say 1 tablespoon of bentonite weighs 11-12 grams. A tablespoon in 5-gallons works out to about 0.6 g\/L, which is what I&#8217;ll use. I could try to get closer to my target of 0.5 g\/L using a combination of teaspoons, quarter teaspoons, and so on, but the measuring errors would add up quickly.<\/p>\n<p>So I boiled about 150 ml water in the microwave (about 2.5 minutes), added 1 tablespoon of the bentonite powder, and stirred.<\/p>\n<p><img decoding=\"async\" src=\"\/pic\/20070527 - stirring bentonite.jpg\" alt=\"It takes a good 20 minutes of stirring and scraping to turn clumpy wet bentonite clay into a smooth slurry.\" title=\"Stirring Bentonite\" vspace=\"10\" \/><\/p>\n<p>And stirred, and stirred, and stirred. It got gooey and clumped. I scraped (with a knife- don&#8217;t use your fingers!) and stirred some more. It was thick. I added more water. When you do this, you will start to think that it will never work. But after 20 minutes of <em>constant<\/em> stirring (don&#8217;t stop). You will get a reasonably smooth slurry.<\/p>\n<p><img decoding=\"async\" src=\"\/pic\/20070527 - pouring bentonite slurry.jpg\" alt=\"Pouring the thick but smooth bentonite slurry from a measuring cup into a jar.\" title=\"Pouring Bentonite Slurry\" vspace=\"10\" \/><\/p>\n<p>After pouring it into a jar, I&#8217;ll let it sit overnight. I&#8217;ll give the jar a forceful twist, whenever I pass, just for good measure. Tomorrow, I&#8217;ll pour it into my sanitized carboy, along with a dose of sulfite, and rack the mead into it.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>When I rack the mead from it&#8217;s primary fermenter to a 5-gallon carboy, it will throw off a deposit of mostly dormant yeast. To separate the mead from this sediment, or lees as it&#8217;s called, I&#8217;ll have to rack again in a month or so. Since I&#8217;m going to have to rack again anyway, I&#8217;ve [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[12,22],"tags":[48],"class_list":["post-30","post","type-post","status-publish","format-standard","hentry","category-enology","category-mead","tag-nad"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/washingtonwinemaker.com\/blog\/wp-json\/wp\/v2\/posts\/30","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/washingtonwinemaker.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/washingtonwinemaker.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/washingtonwinemaker.com\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/washingtonwinemaker.com\/blog\/wp-json\/wp\/v2\/comments?post=30"}],"version-history":[{"count":0,"href":"https:\/\/washingtonwinemaker.com\/blog\/wp-json\/wp\/v2\/posts\/30\/revisions"}],"wp:attachment":[{"href":"https:\/\/washingtonwinemaker.com\/blog\/wp-json\/wp\/v2\/media?parent=30"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/washingtonwinemaker.com\/blog\/wp-json\/wp\/v2\/categories?post=30"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/washingtonwinemaker.com\/blog\/wp-json\/wp\/v2\/tags?post=30"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}